Skip to content

StatSpin®
Solutions

The StatSpin® family of high-speed tabletop centrifuges provides quality sample separation to meet the demand for rapid test turnaround time, delivering operational efficiency and staff satisfaction for your laboratory at a lower cost.

*StatSpin® products are made by Beckman Coulter and distributed in the U.S. by HemoCue America, except to veterinary laboratories and veterinary offices.

Experience rapid turnaround time and workflow efficiencies

  • Deliver high g-forces and provide two- to five-minute STAT sample processing for gel or non-gel tubes
  • Enhance workflow to achieve faster results and improve turnaround times for Emergency Department and other critical samples

Enhance staff satisfaction

 

  • Process samples on quiet tabletop centrifuges with simple operation and minimal maintenance requirements
  • Free your staff from spending unproductive time waiting for sample separation on a conventional centrifuge
Read more
Contact us

 

StatSpin® Express 2 Centrifuge

 

alternatetext

High productivity and lower cost

Eliminate sample preparation bottlenecks in busy clinical laboratories with the StatSpin® Express 2 Centrifuge. This compact and quiet centrifuge spins standard 5 or 3 mL blood collection tubes along with inserts for 1.5-2mL microtubes at three factory-set timed cycles of 30, 120, and 180 seconds. For peak work flow, several units can provide higher throughput than larger, more costly alternatives. Run up to 4 tubes per cycle with minimal risk of tube breakage due to the unique rotor design.

 

Ordering Information
SSX2 – StatSpin® Express 2 Centrifuge for 100-240 V, 50/60 Hz. Includes 4-place rotor (RTX4), universal power supply, removable chamber liner, four 5 mL inserts and North American power cord.

Key benefits

01

Compact low-profile design

02

No need to carry the rotor back and  forth to the centrifuge

03

Variety of selectable run times to precisely replicate most procedures developed on other centrifuge equipment

04

Run up to 4 tubes at a time

Product specifications

6 in. x 6.6 in. (15.2 cm x 16.8 cm) (H x D)
5 lbs (2.3 kg)

Quick spin: 30 seconds
Normal: 120 seconds
Hard spin: 180 seconds

8,500 rpm/4,440 x g (+/- 5%)

Approximately 20 seconds

Approximately 25 seconds

Accepts collection tubes of up to 5 mL (13 x 75 mm), monovette syringe tubes and smaller tube formats; adapters available for 1.5-5 mL tubes

24Vdc, 3.0A Includes switching power supply for 100 to 240 VAC, 50/60 Hz (remote power supply has a 50 cm/3.5 ft line to the centrifuge and a 5 ft North American power cord. Replacement AC power cord must have an IEC320/CEE22 connector)

One year

*StatSpin® Express 2 Centrifuge Instructions For Use 55-003910-001. FE Specifications subject to change without prior notice. The StatSpin® Express drive and suspension system are covered under U.S. Patent No. 5,566,919. Certified by a Nationally Recognized Testing Laboratory (NRTL) for the US and Canada

 

StatSpin® Express 3 Centrifuge

 

alternatetext


Faster turnaround times and high productivity

With the StatSpin® Express 3, your laboratory should experience faster turnaround times and high productivity. This primary tube centrifuge holds up to 8 tubes per run, with the ability to run 10 mL tubes or 5 mL with an adapter. The StatSpin® Express 3 is simple to use and patient samples can be run on demand without batching runs. The StatSpin® Express 3 features three settings that provide results in 2, 3, or 5 minutes, without the need for speed adjustment.

 

Ordering Information
SSX3 – StatSpin® Express 3 Centrifuge for 100-240 V, 50/60 Hz. Includes 8-place rotor, removable bowl liner, eight 5 mL inserts and power cord.

 

Key benefits

01

Lid remains locked until the rotor comes to a complete stop

02

Small, round footprint takes up little bench space and fits well in small corners

03

Just load tubes, select time, and press start

Product specifications

Height 7 in (18 cm)
Width 11 in (26.7 cm)
Depth 10 in (25.4 cm)
Weight 8.75 lbs (4.3 kg)

2 minutes / 7200 rpm (+/-5%) /
4400 xg
3 minutes / 7200 rpm (+/-5%) /
4400 xg
5 minutes / 5600 rpm (+/-5%) /
2685 xg

≤ 25 seconds

≤ 30 seconds

Accepts blood tubes 2-10 mL

100-240 V, 50/60 Hz, 3 amp

Two years

*StatSpin® Express 3 Centrifuge Instructions For Use 55-005187-001. ED Specifications subject to change without prior notice. The StatSpin® Express drive and suspension system are covered under U.S. Patent No. 5,566,919. Certified by a Nationally Recognized Testing Laboratory (NRTL) for the US and Canada

 

StatSpin® Express 4 Centrifuge

alternatetext

High speed horizontal centrifuge

With the StatSpin® Express 4, your laboratory will experience fast turnaround times and high productivity with less space. This high-speed horizontal centrifuge holds up to 8 tubes per run, with the ability to accommodate tubes from 1.5 mL to 10 mL. The StatSpin® Express 4 features three settings that provide results in 3, 5, or 10-minutes without the need for speed adjustment. An audible alarm sounds when the cycle is complete so you can begin your next run.

 

Ordering Information
SSH4 – StatSpin® Express 4 Centrifuge for 100-240 V, 50/60 Hz. Includes 8-place rotor, eight 7 mL inserts, eight 10 mL inserts, manual latch release tool, one hex key tool, and power cord.

 

Key benefits

01

Lid remains locked until the rotor comes to a complete stop

02

Round footprint takes up little bench space and fits well in small corners

03

Just load tubes, select time, and press start

04

Horizontal spin design for good blood fractionation

Product specifications

Height 8 in (20.3 cm)
Width 13 in (33 cm)
Depth 16 in (40.6 cm)
Weight 20 lbs (9 kg)

3 minutes / 5100 rpm (+/-5%) /
4000 xg
5 minutes / 5100 rpm (+/-5%) /
4000 xg
10 minutes / 4500 rpm (+/-5%) /
3100 xg

≤ 30 seconds

≤ 30 seconds

Accepts collection tubes 1.5-10 mL

100-240 V, 50/60 Hz, 2.5 amps

Two years

*StatSpin® Express 4 Centrifuge Instructions For Use 55-006276-001CD Specifications subject to change without prior notice. The StatSpin® Express drive and suspension system are covered under U.S. Patent No. 5,566,919. Certified by a Nationally Recognized Testing Laboratory (NRTL) for the US and Canada

 

StatSpin® MP Centrifuge

 

alternatetext

Flexible solutions ready in two minutes

With the StatSpin® MP centrifuge, your STAT lab, clinic, or office laboratory will experience fast turnaround times and potentially greater sample throughput. The unit is ideal when processing small volumes of samples potentially reducing labor and expenses involved in venous blood collection. Fast and efficient, the StatSpin® MP is quiet and produces nearly vibration-free operation. The coated steel interior is easy to clean and the lid remains locked until rotor comes to a complete stop for operational safety. The StatSpin® MP is a lightweight unit with low mass rotors that achieve top speeds in a few seconds. Rotors can easily be changed to handle samples for hematocrit readings, obtaining urine sediment, and plasma separation.

 

Ordering Information
SSMP – StatSpin® MP Centrifuge with RT12 and RH12 rotors. Replacement rotors can be ordered separately.
B71954 – StatSpin® MP Centrifuge with CritSpin Digital Hematocrit Reader and RT12 and RH12 rotors.
CSD2 – CritSpin Digital Hematocrit Reader with remote power supply (for 100-240 V, 50/60 Hz).

 

Key benefits

01

Serum or plasma separations with a spin time of 30 to 120 seconds

02

Use the precalibrated conical flip-cap tube with 1.5 mL of urine; spin time takes only 45 seconds

03

Offers quiet, two-minute spin for 12 glass or SafeCrit plastic capillary tubes at a time

Product specifications

Height 6.3 in (16 cm)
Diameter 6.6 in (16.8 cm)
Weight 5.5 lbs (2.5 kg)

Urine / 9,800 rpm / 3,900 xg / 45 sec / RT12
Hematocrit / 16,000 rpm / 13,700 xg / 120 sec / RH12
Tube Rotors / 15,800 rpm / 12,000 xg / 30 sec / RT12

Approximately 6 seconds

Approximately 10 seconds

16,000 rpm

13,700 xg

One year

*StatSpin® MP Centrifuge Instructions For Use 55-001806-001.H

 

StatSpin® Cytofuge 2

 

alternatetext

Compact cytocentrifuge system

The StatSpin® Cytofuge 2 meets your cytocentrifuge needs with easy-to-use controls and snap-seal filter concentrators that make operation simple. Your patient samples are processed quickly, quietly, and conveniently on almost any bench or biological safety cabinet due to its compact, low profile design. The Statspin® Cytofuge 2 processes a complete range of body fluids, including: pleural fluids, sputum, urine, bronchial washings, and more. Have confidence in your results with consistent, high-quality slide preps and standardized procedures.

 

Ordering Information
CF02 – Cytofuge 2 Cytocentrifuge for 100-240 V, 50/60 Hz. Includes universal power supply, 4-place rotor with lid, and start-up supply of accessories.
FF01 – Cytofuge filter concentrators, 48 per box
FFCL – Replacement filter clips, 4 per bag
FFRI – Reusable filter concentrators, 20 plastic concentrators and 200 filter cards
CC01 – 1-well with gaskets, 10 per box
CC03 – 3-well with gaskets, 10 per box
CCR1 – Autoclavable 1-well with gaskets, 10 per box
CCR3 – Autoclavable 3-well with gaskets, 10 per box
GK01 – 1-well, 100 per bag
GK03 – 3-well, 100 per bag
CLIP – Replacement stainless steel clips, 10/bag
BP01 – Replacement backing plates, 10/ba

Key benefits

01

Compact low-profile design eliminates the need to carry the rotor back and forth to the centrifuge

02

Safety mechanisms reduce exposure to biohazards with covered rotor and chamber gaskets

03

Variety of selectable speed and run time to precisely replicate most procedures developed on other cytocentrifuge equipment

04

Process up to 4 samples at a time

Product specifications

Height 5.3 in (13.5 cm)
Diameter 6.8 in. (17.3 cm)
Weight: 4.75 lbs (2.2 kg)

600 rpm, 20 xg
700 rpm, 27 xg
850 rpm, 40 xg
1,000 rpm, 55 xg
1,300 rpm, 93 xg
1,600 rpm, 140 xg
2,200 rpm, 265 xg
4,400 rpm, 1,060 xg

Cover interlock system, leak-resistant rotor with transparent lid, low voltage drive system (24V), designed to meet requirements of IEC-1010-2-020

1 to 4 slides

2, 4, 6, 8, 10, and 30 minutes

24Vdc, 1.7A Includes power supply for 100 to 240 VAC, 50/60 Hz

One year

*StatSpin® Cytofuge 2 Centrifuge Instructions For Use 55-003074-001FE